Machine de découpe au jet d'eau YC CNC 5 axes
Description du produit
Description du produit:
Parce que la découpe au jet d'eau est une sorte de découpe flexible, la section du produit découpée par la machine de découpe au jet d'eau CNC à trois axes traditionnelle aura un certain angle d'inclinaison, mais afin d'assurer la précision de la section de découpe verticale, la vitesse de coupe doit être réduite. La machine à jet d'eau dynamique à 5 axes YC peut assurer la précision de la section de coupe verticale en compensant l'angle de coupe de ±10° sans réduire la vitesse de coupe.
Ce type de machine de découpe au jet d'eau dynamique à 5 axes est très approprié pour couper le marbre et le granit pour faire du parquet en pierre, car on peut également dire qu'il s'agit d'une machine de découpe en biseau. La pierre taillée par elle non seulement n'a pas besoin d'être polie deux fois, mais permet également d'économiser du temps et des efforts; mais rend également les espaces du parquet plus petits et le parquet du sol plus parfait.
Paramètres du produit :
Détails de la table à découper
|
|
|
|
|
|
|
|
|
Pompe à haute pression
|
High Pressure Pump Main Feature: Control: PLC Shifting: electro-hydraulic Control Cooling: cooler/oil heat exchanger Inlet water filter accuracy: ≤0.45μm Oil-return filter accuracy: 20 μm Working temp: 0-50°c Outlet: UNF 3/8" Cooling in/out-let: NPT1" Max orifice size: 0.33mm
Siemens or YASKAWA motor
The high pressure pump designed by our company is easier to install and maintain, and the working pressure is stable, which fully ensures the working efficiency.
The whole set of intensifier assembly or main parts of intensifier assembly are imported from USA (Accustream/Hypertherm) directly.We are the partner of Hypertherm.
|
|
|
|
|
|
|
Série Othe r de p UMPS haute pression
|
|
|
Double High Pressure Pump |
Servo high Pressure Pump |
Hypertherm High Pressure Pump |
Contrôleur CNC
|
|
YC Waterjet Cnc Controller And Software(WEIHONG System) 1.17ʺLCD liquid crystal display. 2.DNC on-line working function. 3.Functions of returning arbitrary point, bending and circular are working auto deceleration. 4. Function of cutting figure imitation display. 5. 80GB memory hard disk. 6. MITSUBISHI AC servo driver and motor. 7. 1GB memory card. 8. Multilingual function(Chinese English etc.). 9. Drive-by-wire and hand-hold controller. 10. NAIKY PCIMC-6A special software is special for YC. Noted:You can also choose the Italian ECS or ESA control system.
|
Système d'alimentation abrasif et système de refroidissement
|
|
|
Abrasive feeding system | Air cooling system | Oil cooling system |
Article facultatif pour la machine à jet d'eau
|
Waterjet Auto Sludge remove systemRemove the abrasive from the tank automatically, separate the abrasive and water.Reduce the labor force,improve work efficiency.The absorption pump sucks up the mixture of sand and water from the tank into a collection box when it works.There are plastic woven filter bags in the collection box,water is recycled to the machine tank, sand and the mixturefrom cutting are collected into filter bags Inside. So as to achieve the purpose of automatic collection to make it easy to clean.
DATA OF ABSORPTION PUMP |
|
Water Jet Soften Treatment Many kinds of compounds exist in the running water (such as calcium carbonate, carbonic acid). As the machine works, the temperature rise will generate some substance of the reaction of chemistry or physics-as we called it furring, which will reduce the life of the high pressure system and increase the cost. After many years' experience, we have developed the system that can solve the problem. We would like to recommend you this optional part if your supplied water is low quality.
Quality requirement for water |
|
|
Hydraulic Loading System |
Water Jet Cutting Head With Drilling Function |
Produits connexes
|
|
|
Dynamic 5axis Waterjet Machine
(Bevel Cutting 0-±10°) |
Max 5axis WaterJet Cutting Machine (Bevel Cutting 0-±45°) |
Pure water waterjet cutting machine |
|
|
|
Multi- heads Machine |
Cantilever Waterjet Cutting Machine
|
Robotic Waterjet Cutting Machine |
Échantillons de coupe
Emballage et livraison
Commentaires des clients
Notre service
Service avant-vente
Informations sur la société
|
Development1999, YC Industry was established by Mr. Min, mainly engaged in manufacturing large production line. 2005, YC started to research and developed UHP water jet cutting equipment and cooperated with German KMT as well.
2008, YC started to cooperate with the UK agent. 2019,YC has sold the products to more than 50 countries . |
Why usWe are engaged in machinery manufacturing since the year 1999,there are more than 20% workers with more than 8 years experience in water jet cutting field.Our chief engineer Mr. Tian who started research of water jet when he was a university student has 20 years experience in water jet cutting field, and other technical persons have over 10 years experience.
For different customers in different industries we will provide different solutions, Your water jet is tailored based on your individual needs.
|
Certifications
Groupes de Produits : Machine à jet d'eau > Machine de type intégral série L